Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

178/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.4 Sending and saving tightening programs, configurations and PLC assignment tablesTable 8–1: Files with file name extensionsFilesTightening programsAll tightening programsTightening channel configurationsPLC assignment tables for SE/CSQuality code assignment tablesHMI CS configurationsProfibus DP data for CSGraph memory configurationsResults storage configurationsOK/NOK counter configurationsPrinter 1/2 configurationsPLC (3964R) 1/2 configurationsFTP configurationsID code configurationsFile name extension*.prg*.prx*.scg*.sio*.qtb*.sdc*.sdp*.scv*.sre*.cnt*.dcg*.dcg*.dcg*.dcgNoteThe .dcg files can only be stored or loaded in the respective menu under System → Tightening cell data.An open and modified file is saved under the same name with File → Save.The contents of a tightening cell are saved in several individual files with File → Save tightening cell.These files can be opened separately with the BS350 (File → Open...) and, if needed, be sent back individuallyto the controller.The following settings can be specified in this menu item:– Directory path– Channel selection (only one channel is available with the Compact System)– Selection of the data to be savedSaving is started by selecting Save. The saved data is stored in the selected directory with the identification“Ch x.y channel name”. The file name extension is based on Table 8–1.NoteAll tightening programs from the tightening controller are saved as *.prx files.Exit the dialog with Close.8.4.3 Data backup with the backup functionWhen the operating computer is connected to the controller, the data backup is performed throughData → Backup.... All of the configuration data and tightening programs in the controller are stored in thebackup file.It is not possible to see the individual files (e.g. PLC table) in a backup file, i.e. the backup file serves asa so-called collective file. You can only save data in separate files with File → Save tightening cell (seepage 177).Note Further information on data backup can be found under “Working with the System” on page 245!System 350 | 3 608 878 040/05.2008
8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 179/3168.5 Operating the Compact System8.5 Operating the Compact System8.5.1 General information on the configurationThe configuration of a tightening channel with BS350 includes logical linkage and parameter assignmentof all electronic and mechanical components involved in the tightening channel. The configuration window(see Figure 8–4) opens when the following menu items have been selected:– System → Tightening channel configuration in online mode (see page 180) or– File → New → Tightening channel configuration in offline mode (see page 189).Layout of the configuration windowThe configuration window of the BS350 displays (see Figure 8–4, from left to right):– Component selection– Configuration of the tightening channel as logically linked components subdivided into four columns(from left to right):– Name– Symbol– Parameters– Notes, if applicable– Global parametersComponent selectionConfiguration fieldsGlobal parametersName Symbol Parameters NotesFigure 8–4:Layout of the configuration windowSystem 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129: 128/316 Bosch Rexroth AG | Tighteni
Page 174 and 175: OKNOK191781624FGC1C3C2CS351174/316
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
.270/316 Bosch Rexroth AG | Tighten
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?