Rexroth Tightening System 350 System Documentation - Rhino ...

298/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.4 Results storage and statisticsTo save the results storage configuration:⇒ Click on File → Save to save the configuration of the results storage in an *.sre file.10.4.4.2 Calling up the results storage capacityThe results storage capacity is indicated in the menu item System test → Tightening channel info. Tobe displayed, SE/CS (Fig. 10–60 right) must be selected:Figure 10–60: Calling up the results storage capacityExampleAccording to Fig. 10–60 on page 298 0 results are stored in the results storage. 20000 results in totalcan be stored in the activated ring memory (RMM). The 20001st result would overwrite the oldest resultin this case.10.4.5 Changing the batteryThe storage of tightening results in the case of an emergency-OFF takes place via an installed battery(factory installed). Results data will be lost when the system is switched off/on if the battery power is insufficient.To change the battery, proceed as described in the operating instructions “CS351” 3 609 929 B45.NoteYou can deactivate the battery monitoring in the BS350 operating system under the settings for the controllerin the menu item System → Tightening channel configuration.10.4.6 Correlation between results storage and statisticsThe screen in Fig. 10–61 shows the effect of the results storage configuration on the display in the menuitem Display → Results storage and statistics, index card Results.System 350 | 3 608 878 040/05.2008