Rexroth Tightening System 350 System Documentation - Rhino ...

10 Working with the System Tightening Technology | Bosch Rexroth AG 251/31610.1 Settings in the BS350WARNING!Unauthorized accessIf the top administration level for a location name in a tightening cell is left empty, every user canaccess this tightening cell if his location access authorizations also contain an empty line.⇒ Always fill in the top administration level for a location name in a tightening cell!ExampleThe following figures show an example of location names allocation:7-stage location name with associated naming of the administration levels (see example onpage 250)Country Location Plant Area Department Group StationD Munich II ZIP 3A F3A Cylhead3-stage location namePlant Department StationIII KG4 3A10.1.4.3 Password administration and location access authorizationsThe password administration is located in the BS350 operating system and thus on the computer wherethe BS350 is installed. Each computer thus has its own password/location access authorization administration.There is only one password/location access authorization administration for installations that canbe started several times (see page 246).The following entries for each user are administered in the password/location access authorization administration:– User name– Password– Up to 10 location access authorizationsStructure of the location access authorizationsThe location access authorizations are assigned based on the seven administration levels (up to 8 charactersfrom the range ASCII 32 to 127, other characters will not be accepted). An empty entry results inempty entries below it in the hierarchy.NoteEmpty fields (= wildcards) in the location access authorizations give the user access to tightening cellswith any entry in the corresponding administration level.Exception: If the first entry is empty, the location access authorization will not permit access to a tighteningcell unless the tightening cell’s location name has no entry in the topmost administration level.System 350 | 3 608 878 040/05.2008