Rexroth Tightening System 350 System Documentation - Rhino ...

7 Data Services Tightening Technology | Bosch Rexroth AG 89/3167.2 Ethernet communicationThe following conditions must be fulfilled to ensure that the tightening system uses the sequence number:– Four more spaces than the number of characters that are transferred in the ID code file must be releasedin the mask for ID code masking (see example).ExampleUse of sequence numbers:ID code file contents: ID_867954 (9 characters) I D _ 8 6 7 9 5 4Mask: Byte numbers 4 to 9 for the ID code and e.g. 10 to13 for the sequence numberResulting ID code (with xxx = consecutive sequence number)✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔8 6 7 9 5 4 _ x x xResults file name: C H _ 8 3 7 9 5 4 _ x x x . t x tTo enter the mask for the file name:1. In the BS350 operating system, click on System → Tightening cell data.2. Click on FTP.3. Select the File system index card4. Under File name definition, click the desired location in the Mask line.By entering an example character sequence in the Example ID code field, the results in the maskcan be directly read. Additionally, the corresponding file name is also displayed underneath the field.Figure 7–8:ID code masking in the operating system7.2.3 Results output formatsTo set the desired output format:1. In the BS350 operating system, click on System → Tightening cell data.2. Click on FTP.3. Select the Results index card.A description of the various options can be found in the following sections.System 350 | 3 608 878 040/05.2008