Rexroth Tightening System 350 System Documentation - Rhino ...

138/316 Bosch Rexroth AG | Tightening Technology 7 Data Services7.3 3964R communication7.3.4.9 Transmission timesTransmission times depend on the configuration of the RS232 interface. Data rates of 300 to 19,200baud are possible. Table 7–30 displays the expected transmission times for typical applications:Table 7–30: Data sets for transmission and the necessary transmission timesApplicationTransmission time (seconds)Channels Format Actual/set values at 19200 baudSingle channel Binary Actual and set values 0.2Single channel Binary Actual values 0.1Single channel ASCII Actual and set values 0.3Single channel ASCII Actual values 0.27.3.5 Time sequence for tightening results data preparation7.3.5.1 ID code processingID codes are used if they are available (100 ms) before starting the tightening job (CH x.y Cw,CH x.y CCw). Preparation of ID codes for results is described on page 79.(1)(A)(2) (3)(B)(4) (5)HCH x.y CwCH x.y InCyLHLHCH x.y CyCmpLHCH x.y ResRsLtFigure 7–35:Chronological sequence for processing ID codes(A)Tightening(B)ID codeCH x.y Cw StartCH x.y InCy Tightening activeCH x.y CyCmp Sequence endCH x.y ResRs Result reset(1) CycleSystem 350 | 3 608 878 040/05.2008