Rexroth Tightening System 350 System Documentation - Rhino ...

308/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.5 Data backup10.5 Data backupVarious software and configuration files are necessary for correct function of the Tightening System 350.They are stored in the tightening cell. Some of this software, such as e.g. the firmware for a controller, areprovided by Rexroth and can be requested again, if necessary. Other software, such as the tighteningprograms or the PLC tables, are individually generated and must be saved by the system operator.You can either save the data as single files or as a complete core image.10.5.1 Saving the entire tightening cell as single files10.5.1.1 Saving in single filesIn the BS350 operating system, software, such as the tightening programs or the PLC tables, can be individuallygenerated and then transferred to the controller. It is also possible to save and open this dataon an external data medium. An individual tightening program is accessed, if necessary.By saving the tightening cell in the BS350, it is possible to separately store individually generated softwarefrom the entire tightening cell. When restored, the operating system can be used to open, edit, andthen send individual files to the controller, in the same manner as when generating the software.To save the contents of a tightening cell in single files:1. Click on File → Save tightening cellThe Save tightening cell dialog will appear (Fig. 10–72).Figure 10–72: Save tightening cell dialog2. Enter the directory path where the single files should be stored.3. Select which data should be stored.4. Click on Save to start the saving process.The saved data is stored in the selected directory in a folder with the identification Ch x.y channelname. The file name extension is based on Table 10–7..Table 10–7: File name extension (section 1 of 2)FilesTightening programsAll tightening programsTightening channel configurationsPLC tablesQuality code assignment tablesFile name extension*.prg*.prx*.scg*.sio*.qtbSystem 350 | 3 608 878 040/05.2008