Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

176/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.3 Connecting the PC to program the tightening system2. In the BS350 operating system, click on System → Tightening channel configuration.3. Double click on the line CS to view the interfaces.4. Double click on the line X7E1.The Compact System X7E1 parameter dialog will appear (see page 184).5. Enter the desired data to configure the Ethernet interface.6. Click on Accept to accept the data and close the parameter dialog.7. Click on Data → Send to send the modified data to the controller.To select the Ethernet interface:1. Click on PC → Interface.2. Select the Ethernet interface.3. Enter the new IP address under Tightening cell.4. Click on OK to accept the settings.5. Click on System test → Tightening channel info to test the connection.8.3.5 Logging onto the tightening system (password entry)In order to be able to change tightening programs and configurations, the user must be logged onto thetightening system under his user name and password.NoteThe user does not have to be logged onto the system to call up configurations, results, error lists, etc.To log onto the tightening system:1. Click on the symbol orclick on Administration → Log ON/OFF orPress the [F3] button on the keyboard.2. Enter the password Robert and confirm with OK.Figure 8–3:User name Bosch, password RobertThe status Log ON is shown in the status bar.Note Information on changing the password can be found under “User administration” on page 250!System 350 | 3 608 878 040/05.2008
8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 177/3168.4 Sending and saving tightening programs, configurations and PLC assignment tables8.4 Sending and saving tightening programs, configurations andPLC assignment tables8.4.1 Sending filesPrerequisites for sending files:– A connection of the PC to the tightening controller with set-up interfaces (see page 174)– Password entry in the BS350 (see page 176)The following files, among others, can be sent to the tightening controller:– One or more tightening programs for this tightening controller– Tightening channel configuration– PLC assignment tableThe data is sent by:– Selecting the Data → Send... menu item or– Selecting the Data → Send to... menu item or .8.4.1.1 SendFiles loaded online can be edited and then sent to the tightening controller with Data → Send.... Theseinclude the:– Tightening program– Tightening channel configuration– PLC assignment table.NoteFiles created offline cannot be sent with Data → Send... or !To do this, use Data → Send to... or .8.4.1.2 Send to…Files loaded online or created offline can be sent to the tightening controller with Data → Send to....These include:– One tightening program or several tightening programs simultaneously– Tightening channel configuration– PLC assignment table.8.4.2 Saving dataThe file presently open is stored on the data storage medium (e.g. hard disk) with the File → Save as...menu option. These files include the:– Tightening program– Compact System configuration– PLC assignment tableThe following table gives an overview of the file name extensions when they are saved.System 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127: 126/316 Bosch Rexroth AG | Tighteni
Page 174 and 175: OKNOK191781624FGC1C3C2CS351174/316
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
.270/316 Bosch Rexroth AG | Tighten
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316:
Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?