Rexroth Tightening System 350 System Documentation - Rhino ...

178/316 Bosch Rexroth AG | Tightening Technology 8 Basic Commissioning8.4 Sending and saving tightening programs, configurations and PLC assignment tablesTable 8–1: Files with file name extensionsFilesTightening programsAll tightening programsTightening channel configurationsPLC assignment tables for SE/CSQuality code assignment tablesHMI CS configurationsProfibus DP data for CSGraph memory configurationsResults storage configurationsOK/NOK counter configurationsPrinter 1/2 configurationsPLC (3964R) 1/2 configurationsFTP configurationsID code configurationsFile name extension*.prg*.prx*.scg*.sio*.qtb*.sdc*.sdp*.scv*.sre*.cnt*.dcg*.dcg*.dcg*.dcgNoteThe .dcg files can only be stored or loaded in the respective menu under System → Tightening cell data.An open and modified file is saved under the same name with File → Save.The contents of a tightening cell are saved in several individual files with File → Save tightening cell.These files can be opened separately with the BS350 (File → Open...) and, if needed, be sent back individuallyto the controller.The following settings can be specified in this menu item:– Directory path– Channel selection (only one channel is available with the Compact System)– Selection of the data to be savedSaving is started by selecting Save. The saved data is stored in the selected directory with the identification“Ch x.y channel name”. The file name extension is based on Table 8–1.NoteAll tightening programs from the tightening controller are saved as *.prx files.Exit the dialog with Close.8.4.3 Data backup with the backup functionWhen the operating computer is connected to the controller, the data backup is performed throughData → Backup.... All of the configuration data and tightening programs in the controller are stored in thebackup file.It is not possible to see the individual files (e.g. PLC table) in a backup file, i.e. the backup file serves asa so-called collective file. You can only save data in separate files with File → Save tightening cell (seepage 177).Note Further information on data backup can be found under “Working with the System” on page 245!System 350 | 3 608 878 040/05.2008