Rexroth Tightening System 350 System Documentation - Rhino ...

8 Basic Commissioning Tightening Technology | Bosch Rexroth AG 175/3168.3 Connecting the PC to program the tightening systemTo install the BS350:1. Connect the System Stick to your computer.2. Make sure that the USB driver is correctly installed.NoteThe USB driver and installation instructions are included on the System Stick.3. Execute the file setup.exe.The installation program will start.4. Select the desired language and confirm with OK.5. In the dialog BS350 V2.000 settings select the Start BS350 one time option, i.e. BS350 can onlybe started once on the PC 1) .The BS350 iconwill appear on the desktop after successful installation.8.3.3 Starting the BS350Double click on the BS350 iconto start the program.8.3.4 Setting up the programming interface8.3.4.1 USB interfaceThe USB interface driver must be installed separately. The necessary files and instructions for this can befound on the USB stick provided with the tightening system (hereafter referred to as the “System Stick”).To select the USB interface:1. Make sure that the PC is connected to the Compact System via the USB cable (interface X3U3 onthe front).2. Click on PC → Interface in the BS350 operating system.3. Select the USB interface.4. Click on OK to accept the setting.5. Click on System test → Tightening channel info to test the connection.8.3.4.2 Ethernet interfaceIn order to operate the tightening system via Ethernet, the PC has to be equipped with an Ethernet interfacecard for network operation.The Ethernet interface in the Compact System has the following settings as standard:– IP address: 192.168.1.1– Subnet mask: 255.255.255.0– Gateway 0.0.0.0The rest of the settings are either 0.0.0.0 or empty.To change the IP address:1. Make sure that the PC and tightening cell are connected to Ethernet.If you cannot use the Ethernet connection with the current IP address, additionally establish a directconnection via USB (see page 175).1) The Start BS350 several times option must be selected if multiple tightening cells are to be controlledby one PC. This way a separate parameter directory can be created for each tightening cell.This will enable you to simultaneously display tightening graphs from several cells (see page 246).System 350 | 3 608 878 040/05.2008