Rexroth Tightening System 350 System Documentation - Rhino ...

98/316 Bosch Rexroth AG | Tightening Technology 7 Data Services7.2 Ethernet communicationExtended tightening step– The selected monitoring functions and target functions are output.– The monitoring function Time is always active and output. Additionally, up to nine other monitoringfunctions can be activated and output in the results.– Only set and actual values are output by the monitoring functions, but no other auxiliary parametersare output (e.g. only torque when tightening, no retrospective angle, etc.).– Docu buffers are output even if their corresponding tightening step was not performed. In this case,only the programmed values are output. Actual values are identified with an *.– The output order of the monitoring functions is always the same as illustrated in the results block onon page 99. (The output order is independent from the programming order in the step).System 350 | 3 608 878 040/05.2008