Rexroth Tightening System 350 System Documentation - Rhino ...

More documents

Recommendations

Info

268/316 Bosch Rexroth AG | Tightening Technology 10 Working with the System10.2 Settings with the TFT displayFigure 10–20: Program selectionThe selected tightening program remains the same when the tightening system is switched off and on.Error display (8)Log on/off button (9)Power on button (10)10.2.3.2 Display fieldAn error in the tightening system is displayed as a warning triangle in every menu level. Clicking on thewarning triangle will bring you directly to the error list.You can log on/off in the tightening controller with this button. When logging on, you will be asked toenter a PIN with the key pad (see page 268).You will be automatically logged off 15 minutes after your last action.Touching this button will bring you directly to the power on menu from any menu level.The various parameters for the tightening process and system display are shown in the display field.10.2.3.3 Main menu barFigure 10–21: Main menu barThe main menu bar shows the menu items– Display– Process– System testTouching the arrow button will bring you to the second section. Here, you can find the following menuitem:– SystemFurther information on the various menus can be found in “Description of the menus” from page 270.10.2.3.4 Scroll barYou can move the display through a list by line or page by touching the arrow button in the scroll bar.10.2.4 Key padA key pad is available for entering or changing numbers in the menus, as well as for entering the PIN.System 350 | 3 608 878 040/05.2008
10 Working with the System Tightening Technology | Bosch Rexroth AG 269/31610.2 Settings with the TFT display65431 2Figure 10–22: Key pad1 Preceding sign key2 Decimal point key3 Enter key4 Backspace key5 Delete key6 Title line10.2.4.1 Calling up the key padThe key pad will appear after you touch the field to be edited. This field is identified as an active field bya thicker frame. The value in the field is taken over in the key pad display (Fig. 10–22).10.2.4.2 Element functionsEntry keysEnter key (3)Backspace key (4)Delete key (5)Title line (6)The key pad consists of 12 entry keys. Values can be entered using the number keys, the preceding signkey (1), and the decimal point key (2). A maximum of five digits in front of the decimal point and three digitsafter the decimal point are possible.Pressing the enter key will transfer the current value in the display to the active editing field and close thekey pad.The backspace key deletes the last digit in the display.The delete key deletes the entire value in the key pad.The values to be entered for the parameters are described here.10.2.4.3 Closing the key padAfter you have entered the value, the key pad is closed by pressing the enter key and the value is takenover. Parameter entry is aborted and the key pad closed if you touch any area outside of the key pad.10.2.4.4 Entering the PINWhen logging on with the log on/off button (see page 268), you will be asked to enter a PIN with the keypad. The entered numbers are depicted as “*”. The entry is ended with the enter button (3) (Fig. 10–22).An error message will be displayed if the PIN was incorrect.Another attempt can be started with the log on/off button. If another user is already logged on, a displaywill appear that you have to confirm with OK.On delivery, the default setting of the PIN is 0000. The PIN can be changed in the BS350 in the menuitem Administration → Password administration.System 350 | 3 608 878 040/05.2008
Page 1 and 2:
Rexroth Tightening System 350System
Page 3 and 4:
ContentsSchraubtechnik | Bosch Rexr
Page 5 and 6:
ContentsSchraubtechnik | Bosch Rexr
Page 7:
1 About This DocumentThis chapter c
Page 10 and 11:
10/316 Bosch Rexroth AG | Tightenin
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
F PAF KRF S38/316 Bosch Rexroth AG
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100/316 Bosch Rexroth AG | Tighteni
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
OKNOK191781624FGC1C3C2CS351174/316
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219: 218/316 Bosch Rexroth AG | Tighteni
Page 270 and 271: .270/316 Bosch Rexroth AG | Tighten
Page 316: Bosch Rexroth AGElectric Drives and
show all

Rexroth Tightening System 350 System Documentation - Rhino ...

Create successful ePaper yourself

Delete template?

Save as template?