Metric Tutorials - Autodesk

27 On the View Toolbar, click .
Notice the underslab drainage lines appear in this view.
28 Click View menu ➤ Visibility/Graphics.
29 On the Model Categories tab, expand Lines, and clear Underslab Drainage.
This turns off the visibility of the underslab drainage lines only in this view.
30 Click OK.
31 In the Project Browser, under Floor Plans, double-click Level 1.
32 Click View menu ➤ Visibility/Graphics.
33 On the Model Categories tab, expand Lines, and clear Underslab Drainage.
34 Click OK.
35 Click File menu ➤ Save.
Modifying Annotations
36 Proceed to the next exercise, Modifying Annotations on page 91.
In this exercise, you create a new dimension style using units of measurement that differ from the project
settings. You also load a new beam annotation symbol and apply it to show the beam instance number
rather than the beam type number.
NOTE This exercise requires the completion of the previous exercise. Use the project file that you saved at the
end of that exercise, m_Settings-in progress.rvt.
Create a new dimension style
1 Verify the 3D View is active.
2 Click Settings menu ➤ Annotations ➤ Dimensions ➤ Linear.
3 In the Type Properties dialog, click Duplicate.
4 Enter Linear - Metric for name, and click OK.
5 Under Text, click the default value for Units Format.
Modifying Annotations | 91