Metric Tutorials - Autodesk

8 In the Schedule Properties dialog, click the Fields tab.
9 Under Available Fields, select the following fields, and click Add to add them to the schedule
in order:
■ Count
■ Family and Type
10 Click the Sorting/Grouping tab, and do the following:
■ Select Family and Type for Sort By.
■ Select Grand totals.
■ Clear Itemize every instance.
■ Click OK.
Create a footings schedule for Phase 1 (south)
11 On the Design bar, click Schedule/Quantities
12 In the New Schedule dialog, do the following:
■ Under Category, select Structural Foundations.
■ Enter Footings - Phase 1 for Name.
■ Select Phase 1 (south) for Phase.
■ Click OK.
13 In the Schedule Properties dialog, click the Fields tab.
14 Under Available Fields, select the following fields, and click Add to add them to the schedule
in order:
■ Count
■ Family and Type
15 Click the Sorting/Grouping tab, and do the following:
■ Select Family and Type for Sort By.
■ Select Grand totals.
■ Clear Itemize every instance.
■ Click OK.
Create a sheet and then add views and schedules
656 | Chapter 21 Project Phasing
16 In the Project Browser, right-click Sheets (all), and click New Sheet.
17 In the Select a Titleblock dialog, click OK.
18 In the Project Browser, expand Sheets (all), right-click the new sheet, and click Rename.
19 In the Sheet Title dialog, enter Phase 1 - Structural for Name.
Next, you drag the schedules and project views onto the sheet. Use the following illustration as
a guide as you complete the steps to create your sheet.