Metric Tutorials - Autodesk

This provides a better view of the new below-grade piers.
10 On the View Control Bar, click Reset Temporary Hide/Isolate.
The foundation wall is displayed.
11 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
12 Proceed to the next exercise, Framing Ground and Parking Garage Levels on page 216.
Framing Ground and Parking Garage Levels
In this exercise, you frame the garage and ground levels by adding slabs, sloped slabs, and concrete beam
framing.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_CSM_7.rvt
Frame ground and parking levels
1 In the Project Browser, under Structural Plans, double-click Ground Level.
2 On the Modelling tab of the Design Bar, click Slab.
3 On the Design Bar, click Floor Properties.
4 In the Element Properties dialog:
■ For Type, select Insitu Concrete 225 mm.
■ For Height Offset From Level, enter 0.
■ Click OK.
5 On the Design Bar, click Pick Walls.
216 | Chapter 5 Creating a Structural Model