Metric Tutorials - Autodesk

32 In the Schedule Properties dialog, click OK.
33 In the Element Properties dialog, click OK.
34 Click File menu ➤ Close.
Creating a Type Schedule
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
35 Proceed to the next exercise, Creating a Type Schedule on page 268.
In this exercise, you learn how to create a type schedule.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_Schedules_Custom.rvt.
Modify the table elements
268 | Chapter 8 Scheduling
1 In the Project Browser, under Schedules/Quantities, double-click Structural Framing Schedule.
2 Modify the schedule headings as follows:
■ Select Mark, and enter MARK.
■ Select b (Width), and enter W.
■ Select h (Depth), and enter D.
■ Select Comments, and enter REMARKS.
■ Select the title, and enter GROUND LEVEL CONCRETE BEAM SCHEDULE.
NOTE Under the Project Browser, click Schedules/Quantities. Notice that the schedule name has
changed.
3 Select headings W and D.
4 On the Options bar, click Group.