Metric Tutorials - Autodesk

Add vertical and horizontal lines
6 On the Options Bar, click , and enter 140 for Offset.
7 Move the cursor over the right inside border line, and click to draw a new vertical line.
8 On the Options Bar, click , and click .
9 Enter 0 for Offset.
10 Draw a horizontal line 140mm below the upper inside border as shown.
11 Draw a horizontal line 120mm below the last horizontal line as shown.
12 Draw a horizontal line 120mm above the lower inside border as shown.
13 On the Design Bar, click Modify, and, while pressing CTRL, select the second and third horizontal
lines.
14 In the Type Selector, select Wide Lines.
15 Zoom in on the lower-right corner of the sheet.
16 On the Design Bar, click Lines.
17 In the Type Selector, select Title Blocks.
548 | Chapter 17 Creating Components in the Family Editor