Metric Tutorials - Autodesk

10 On the Design Bar, click Modify.
Place rebar perpendicular to the column face
Set rebar spacing
Copy the rebar
11 On the Modelling tab of the Design Bar, click Rebar ➤ Place Rebar Perpendicular.
12 Click on the Rebar Shape Browser, scroll down the list of available shapes, and select Rebar
Shape: M_00.
13 Click to place a single rebar as shown.
14 Select the single rebar, and on the Options Bar, do the following:
■ For Rebar Size, select Rebar Bar: 16M.
■ For Layout, select Fixed Number.
■ For Quantity, enter 3.
15 On the Design Bar, click Modify.
16 Select the rebar.
17 On the Edit toolbar, click (Copy).
18 Click the rebar centerline as the copy starting point, as shown.
Reinforcement in a Column | 325