Metric Tutorials - Autodesk

17 On the View Control Bar:
■ Click Scale control, and select 1:50.
■ Click Detail Level ➤ Fine.
■ Click Model Graphics Style ➤ Shading with Edges.
Create a sheet and place the section, elevation, and callout views on the sheet
298 | Chapter 9 Steel Details
18 Click View menu ➤ New ➤ Sheet.
19 In the Select a Title block dialog, select A1 Metric, and click OK.
20 In the Project Browser, expand Sheets (all).
21 Right-click S-6 Unnamed, and click Rename.
22 In the Sheet Title dialog, enter Steel Details for Name, and click OK.
23 In the Project Browser, right-click S-6 - Steel Details, and click Add View.
24 In the Views dialog, select Section: Section 1, and click Add View to Sheet.
25 Move the cursor onto the sheet, and click to place the view.
26 In the Project Browser, right-click S-6 - Steel Details, and click Add View.
27 In the Views dialog, select Elevation: Elevation 1-a, and click Add View to Sheet.
28 Move the cursor onto the sheet, and click to place the view.
29 In the Project Browser, right-click S-6 - Steel Details, and click Add View.
30 In the Views dialog, select Elevation: Callout of West Elevation, and click Add View to Sheet.
31 Move the cursor onto the sheet, and click to place the view.