Metric Tutorials - Autodesk

Duplicating Framing
18 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
19 Proceed to the next exercise, Duplicating Framing on page 167.
In this exercise, you copy Level 2 framing to other levels.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open
Metric\m_RST_CSM_Duplicate_Framing.rvt.
Copy Level 2 framing and deck
1 In the Project Browser, under Structural Plans, double-click Level 2.
2 Enter ZF, and draw a pick box around the entire model.
3 On the Options Bar, click .
4 In the Filter dialog, click Check None, select Structural Framing (Girder, Joist, and Other),
Structural Beam Systems, and Floors, and then click OK.
5 Click Edit menu ➤ Copy to Clipboard.
6 Click Edit menu ➤ Paste Aligned ➤ Select Levels by Name.
7 In the Select Levels dialog, select Level 3, Level 4, and Level 5, and then click OK.
Duplicating Framing | 167