Metric Tutorials - Autodesk

View the completed slab section
Adding Miter Joins
37 In the Project Browser, under Sections (Building Sections), double-click Section 3.
38 On the View toolbar, click , and draw a zoom box around the upper-right corner of the
section view.
Notice the tapered insulation layer slopes to the low point as a planar surface.
39 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
40 Proceed to the next exercise, Adding Miter Joins on page 190.
In this exercise, you add miter joins to the beams on the roof frame to create a flush connection.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_CSM_Miter_Joins.rvt.
View the roof frame
1 In the Project Browser, under 3D Views, double-click 3D - View.
2 Select the slab.
190 | Chapter 5 Creating a Structural Model