Metric Tutorials - Autodesk

The dimensions have been added for reference purposes only.
15 On the Options Bar, for Depth, enter -900 mm.
16 On the Design Bar, click Modify.
Change extrusion properties
Copy extrusion
17 On the Design Bar, click Extrusion Properties.
18 In the Element Properties dialog, under Materials and Finishes, click the value for Material.
19 In the Materials dialog, for Name, select Concrete - Cast-in-Place Concrete, and then click OK.
20 In the Element Properties dialog, click OK.
21 On the Design Bar, click Finish Sketch.
22 On the Family Design Bar, click Finish Family.
23 Select the extrusion.
24 On the Options Bar, click , and select Multiple.
25 Click the corner of the step foundation and the extrusion as shown.
26 Click to place a second copy of the extrusion as shown.
542 | Chapter 17 Creating Components in the Family Editor