Metric Tutorials - Autodesk

9 Draw a section as shown.
10 On the Design Bar, click Modify.
11 Double-click the section bubble to open the section view.
12 Select the section crop view, and drag the view controls so that only Level 4 is visible.
13 On the View Control Bar:
Revise the callout view
■ Click Scale control, and select 1:50.
■ Click Detail Level ➤ Fine.
■ Click Model Graphics Style ➤ Shading with Edges.
14 In the Project Browser, under Elevations (Building Elevation), double-click West Elevation.
A callout symbol is located in this view at the south wall.
15 Select , and zoom in on the south wall at Level 4.
16 Double-click on the callout head to open the view.
Cutting Sections and Adding Views to Sheets | 297