Metric Tutorials - Autodesk

17 On the View toolbar, click (Default 3D View) to display the model with the complete
mansard roof.
18 If you want to save your changes, on the File menu, click Save As, and save the exercise file with
a unique name.
19 Close the exercise file without saving your changes.
20 Proceed to the next exercise, Creating a Low Slope Roof on page 720.
Creating a Low Slope Roof
In this exercise, you add a roof to a building shell. After you add the roof, you modify the slab to represent
roof drains in the low slope roof. You also modify the structure of the roof slab to more accurately represent
the tapered insulation condition used to create the roof drainage system.
Training File
720 | Chapter 23 Roofs
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Common\c_Low_Slope_Roof.rvt.
NOTE This exercise uses a common training file and Imperial units.