Metric Tutorials - Autodesk

Add the garage entrance exit ramp
30 In the Project Browser, under Structural Plans, double-click Garage Level -1.
31 On the View Control Bar, click the Model Graphics Style control, and click Hidden Line.
32 Zoom in around the lower-left corner of the model.
33 On the Modelling tab of the Design Bar, click Slab.
34 On the Design Bar, click Lines.
35 Sketch the slab in the southwest exterior corner of the structure.
36 On the Design Bar, click Slope Arrow.
37 Sketch a slope arrow from left to right.
38 Right-click the slope arrow, and select Element Properties.
39 In the Element Properties dialog:
■ Under Constraints, select Ground Level for Level at Tail.
■ For Height Offset at Tail, enter 0.
■ For Height Offset at Head, enter 150 mm.
■ For Level at Head, select Garage Level-1.
■ Click OK.
40 On the Design Bar, click Finish Sketch.
41 In the Project Browser, under Elevations (Building Elevation), double-click South Elevation.
42 On the View Control Bar, click the Model Graphics Style control, and click Hidden Line.
43 Zoom in on the lower-left corner to see the ramp.
220 | Chapter 5 Creating a Structural Model