Metric Tutorials - Autodesk

■ Completed Structure w/ Roof&Floors
■ Completed Project
Each of the 3D views varies by phase and discipline.
4 Click Settings menu ➤ Browser Organization.
5 On the Views tab, select Discipline, and click OK.
On the Project Browser, notice that Views are divided into Architectural and Structural disciplines.
6 In the Project Browser, expand both the Architectural and Structural category of views.
7 Click Settings menu ➤ Browser Organization.
8 Select Phase, and click Apply.
In the Project Browser, notice that views are grouped based on phase.
9 In the Browser Organization dialog, select Type/Discipline, and click OK.
10 In the Project Browser, expand each view type, and notice that each is grouped by discipline.
Organize Project Browser by sheets
11 Click Settings menu ➤ Browser Organization.
12 Click the Sheets tab.
13 Select Sheet Prefix, and click OK.
14 In the Project Browser, under Sheets, expand each sheet set.
Create a new browser organization name
15 Click Settings menu ➤ Browser Organization.
16 Click the Views tab, and click New.
17 Enter Phase/Type/Discipline, and click OK.
18 In the Browser Organization Properties dialog, click the Folders tab, and specify the following:
■ Group by: Phase
■ Then by: Type
■ Then by: Discipline
19 Click OK.
20 In the Browser Organization dialog, select Phase/Type/Discipline as the current browser
organization, and click OK.
21 In the Project Browser, under Views, expand Complete ➤ 3D Views and then expand Architectural
and Structural.
Modifying Project Browser Organization | 95