Metric Tutorials - Autodesk

■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_Area_Reinf_Wall.rvt.
Create a section view
1 In the Project Browser, under Structural Plans, double-click Garage Level-1.
NOTE The line weights in your file may differ from the examples shown. Some of the rebar line
weights were increased in the illustrations for training purposes.
2 On the Toolbar, click , and draw a zoom box around the upper north wall of the structure.
3 On the View tab of the Design Bar, click Section.
4 Add a section line that cuts through the north wall of the structure as shown.
5 Double-click the section bubble to open the section view.
6 On the View Control Bar, select 1:50 for Scale.
7 In the section view, select the crop view, and drag the controls to resize the view such that only
the foundation wall is shown.
Area Reinforcement in a Structural Wall | 329