Metric Tutorials - Autodesk

■ Under File name, enter Typical Column Beam and Girder Details.
■ Click Save.
Save individual views to the library
5 Click File menu ➤ Save to Library ➤ Save Views.
6 In the Save Views dialog, do the following:
■ In the list of views, clear Drawing Sheet: S.1 - TYPICAL DETAILS.
■ Under Views, select Show drafting views only.
Only the drafting views will be displayed.
■ Select both Footing Section views.
■ Click OK.
7 In the Save As dialog, do the following:
■ Under Save in, navigate to the Detail Library folder created in step 4.
■ For File name, enter Footing Section.
■ Click Save.
NOTE When you save your file, Revit Structure will save views that contain 3D objects; however,
when you insert these views into a new project, only the 2D elements will be inserted.
8 Click File menu ➤ Close.
252 | Chapter 7 Creating Drawings
9 Proceed to the next exercise, Importing Details from the Library on page 253.