Metric Tutorials - Autodesk

Set rebar spacing
8 Click in the Rebar Shape Browser, scroll down the list of available shapes, and select Rebar Shape:
M_T9.
9 Click the top edge of the view to place the rebar.
10 On the Design Bar, click Modify.
11 Select the rebar shapes that you placed in the previous steps, and on the Options Bar, do the
following:
■ For Layout, select Maximum Spacing.
■ For Spacing, enter 100.0.
Place rebar perpendicular to the beam face
12 On the Modelling tab of the Design Bar, click Rebar ➤ Place Rebar Perpendicular.
13 Click in the Rebar Shape Browser, scroll down the list of available shapes, and select Rebar Shape:
M_01.
14 Place 2 rebar in the detail view, approximately as shown.
15 On the Design Bar, click Modify.
16 On the Modelling tab of the Design Bar, click Rebar ➤ Place Rebar Perpendicular.
17 Click in the Rebar Shape Browser, scroll down the list of available shapes, and select Rebar Shape:
M_01.
318 | Chapter 10 Concrete Reinforcement Modelling