Metric Tutorials - Autodesk

Adding Shear Walls
10 In the Project Browser, under 3D Views, double-click East Section - Perspective.
Notice the braces in the back/right of the structural model.
11 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
12 Proceed to the next exercise, Adding Shear Walls on page 150.
In this exercise, you create shear walls that surround one of the stairwells.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open
Metric\m_RST_CSM_Add_Shear_Walls.rvt.
Add shear walls
1 In the Project Browser, under Structural Plans, double-click Level 2.
2 Zoom in on the east stair in grid location F3-G4.
150 | Chapter 5 Creating a Structural Model