Metric Tutorials - Autodesk

11 In the Element Properties dialog, under Layers, for Primary Bar - Type, select 13M, and click OK.
Create a section view
12 On the View tab of the Design Bar, click Section.
13 Add a section line that cuts through the slab opening as shown.
14 On the Design Bar, click Modify.
15 Double-click the section head to open the section view.
16 On the View Control Bar, do the following:
■ For Scale, select 1:100.
■ For Detail Level, select Fine.
■ For Model Graphics Style, select Shading w/Edges.
17 In the section view, select the crop view, and drag the controls to resize the view such that only
the edge of the opening in the slab and the path reinforcement on Level 3 is shown.
344 | Chapter 10 Concrete Reinforcement Modelling