Metric Tutorials - Autodesk

13 Click one of the 356x171x51UB beams, and on the Options Bar, click .
14 In the Element Properties dialog, click Edit/New.
15 In the Type Properties dialog, under Type Mark, enter 356, click Apply, and then OK.
16 In the Element Properties dialog, click OK.
17 Click one of the 254x102x28UB beams, and on the Options Bar, click .
18 In the Element Properties dialog, click Edit/New.
19 In the Type Properties dialog, under Type Mark, enter 254, click Apply, and then OK.
20 In the Element Properties dialog, click OK.
Edit the beam tag family
21 Click one of the 356x171x51UB beam tags, and on the Options Bar, click Edit Family.
When prompted to open the Structural Framing Tag for editing, click Yes. You are now in the
Family Editor.
22 Click the structural label, and on the Options bar, click .
23 In the Element Properties dialog, under Label, for Value, click Edit.
396 | Chapter 11 Annotating and Dimensioning