Metric Tutorials - Autodesk

Add the louvers to the design option
19 On the Basics tab of the Design Bar, click Component.
20 In the Type Selector, select Louver 50mm x 150mm.
21 Place the first horizontal louver in the upper left corner according to the following illustration.
22 On the Design Bar, click Modify, and select the louver you just placed.
23 On the Options Bar, click .
24 In the Element Properties dialog, under Other, enter 5475 mm for Length, and click OK.
The louver now spans the horizontal plane of the roof system.
25 With the louver still selected, click the Edit menu, and click Array.
26 On the Options Bar, specify the following:
■ Clear Group and Associate.
■ Enter 34 for Number.
■ Select 2nd for Move To.
■ Select Constrain.
27 For the array starting point, click in the center of any intersection between the louver and the
beam.
Creating the Roof System Design Options | 605