Metric Tutorials - Autodesk

Add an outrigger
8 Using the same method, add a cantilever beginning at column A2.
9 On the Modelling tab of the Design Bar, click Beam.
10 In the Type Selector, select UB-Universal Beam: 356x171x51UB.
11 Select the left endpoint of the cantilever at A1 as start point of the outrigger.
12 Select the left endpoint of the adjacent cantilever at A2 as the endpoint of the outrigger.
Add intermediate cantilevers
13 Sketch intermediate beams between the outrigger and the beam between A1 and A2.
14 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
15 Proceed to the next exercise, Adding a Concrete Slab with Metal Deck on page 162.
Adding a Concrete Slab with Metal Deck
In this exercise, you add a concrete slab with a metal deck to the model.
Training File
■ Click File menu ➤ Open.
162 | Chapter 5 Creating a Structural Model