Metric Tutorials - Autodesk

After you select each level, an eyeball symbol is displayed to indicate a relationship with the
original element.
NOTE A warning message may indicate that the loaded type has been renamed. The warning can
be ignored.
Copy structural walls, floors, and columns
22 In the Project Browser, under Structural Plans, select Level 1.
23 On the Copy/Monitor Design Bar, click Copy.
24 Click the structural elements to be copied/monitored.
To select more than one element, click Multiple on the Options toolbar, press CTRL, and select
each element.
NOTE If you are prompted that the element type already exists in the project, and that the type from
the new project will be used, click OK.
After selecting each element, an eyeball symbol is displayed to indicate a relationship with the
original element.
NOTE A warning message may indicate that the loaded type has been renamed. The warning can
be ignored.
25 On the Design bar, click Finish Mode.
Change the structural usage of the copied elements
124 | Chapter 4 Starting a New Project
26 Select a structural wall to be copied/monitored, and on the Options Bar, click .