Metric Tutorials - Autodesk

Adding a Sheet to the Project
In this exercise, you add a new sheet to the project, add a section view, and adjust the scale of the view.
NOTE This exercise requires the completion of the previous exercise. Use the project file that you saved at the
end of that exercise, m_RST_Drawings-in progress.rvt.
Add a new sheet to the project
1 On the View tab of the Design Bar, click Sheet.
2 In the Select a Title block dialog box, select A1 metric, and click OK.
3 Select the title block, and on the Options Bar, click .
4 In the Element Properties dialog box, under Identity Data, enter Section Views for Sheet Name,
and click OK.
Section Views is displayed in the title block as the sheet name.
The new sheet, incrementally named S-2 Section Views, is displayed in the Project Browser,
under Sheets (all).
5 Click File menu ➤ Save.
6 Proceed to the next exercise, Creating New Views to Add to Sheets on page 246.
Creating New Views to Add to Sheets
In this exercise, you learn how to create a new section view and a new callout view, and then add them to
a new drawing sheet.
246 | Chapter 7 Creating Drawings