Metric Tutorials - Autodesk

72 Select the slab, and in the Type Selector, select Floor: 160mm Concrete with 50mm Metal Deck.
73 On the View Control toolbar, do the following:
■ For Scale, select 1:10.
■ For Detail Level, select Fine.
■ For Model Graphic Style, select Wireframe.
Apply the custom family to the metal deck
74 Click the Window menu, and open the new family file.
The file should still be open. If it is not, open the file from the saved folder location.
75 On the Families Design Bar, click Load into Project.
The new non-composite metal deck family is loaded into the slab project. If there are multiple
files open, select the slab project from the available files.
76 Select the slab, and on the Options Bar, click .
77 In the Element Properties dialog, click Edit/New.
78 In the Type Properties dialog, under Construction, select Edit for Structure.
79 In the Edit Assembly dialog, do the following.
■ Under Layers, select Layer 3.
■ Under Structural Deck Properties, for Deck profile, select the new metal deck profile file.
■ Click OK.
80 In the Type Properties dialog, click OK.
81 In the Element Properties dialog, click OK.
82 In the Project Browser, under Sections, double-click Section 1.
The new profile is applied to the slab.
528 | Chapter 17 Creating Components in the Family Editor