Metric Tutorials - Autodesk

7 Click View menu ➤ Zoom ➤ Zoom to Fit.
Notice that the orientation of the model resembles the site project.
Report shared coordinates
8 On the Tools menu, click Shared Coordinates ➤ Report Shared Coordinates.
This command allows you to determine the location of elements and points in the model with
respect to the shared coordinate origin.
9 Click any component or in any location on the drawing area.
On the Options Bar, notice the coordinates display in regards to the direction and distance to
the origin.
10 On the File menu, click Close. You can save the file if you wish.
In this exercise, you created a new location using the Manage Place and Locations tool. You rotated a view
to true north and used the Report Shared Coordinates tool to locate components in regards to the origin.
Scheduling Components of Linked Files
In this exercise, you schedule components of the host file and of all linked files.
NOTE This exercise requires the completion of the previous exercises within this lesson and the resulting project
files. If you have not completed the exercise, do so before continuing.
Training File
■ On the File menu, click Open.
■ Navigate to the Model Linking folder you created in the first exercise of this tutorial.
■ Select Site_Project.rvt and click Open.
Create a door schedule
1 Verify that the floor plan Level 1 is the active view.
Scheduling Components of Linked Files | 639