Metric Tutorials - Autodesk

4 Click OK.
5 Repeat the process for any component type that you want to modify.
You may want to open other Design Bar tabs and make modifications to components not
available on this tab. You can also load families and groups from the File menu.
6 Click File menu ➤ Load from Library.
Notice that you have the option to Load Family or Load Group. Loading from the library is
quickest when you know exactly what families you want to load. Press ESC twice to return to
the template.
Use Project Browser to modify families
7 In the Project Browser, expand Families.
Notice that each family category is listed. You can use the Project Browser to modify family
types.
8 Expand Annotation Symbols.
Notice that there is a titleblock symbol loaded. (The titleblock name may vary depending on
the template you started with.)
9 Expand the titleblock, and select the titleblock type.
10 In the Type Properties dialog, click Preview.
This titleblock is currently part of the template. Notice it has Revit in the upper-right corner.
You may want to load a titleblock applicable to your office and then delete this titleblock.
11 To load a titleblock, click Load.
12 Click OK.
You can use the Project Browser to delete a component from the project/template. To do so,
right-click the component, and click Delete.
13 Using any of the techniques learned in previous steps, load, create, or modify any component
families or groups as necessary.
14 Proceed to the next exercise, Modifying Views and View Templates on page 105.
104 | Chapter 3 Modifying Project and System Settings