Metric Tutorials - Autodesk

Adding the Titleblock to a New Project
In this exercise, you add the titleblock that you created to a new project.
Load the new titleblock family into a new project
1 Click File menu ➤ New ➤ Project.
2 In the New Project dialog, click Browse, and in the left pane of the New dialog, select Training.
Navigate to the Metric\Metric Families and Templates\Templates folder. Select the DefaultMetric.rte
file, and click Open. In the New Project Dialog, click OK.
3 On the View tab of the Design Bar, click Sheet.
4 In the Select a Titleblock dialog, click Load.
5 In the Open dialog, navigate to the location of Training A0Horizontal Titleblock.rfa file, select it,
and click Open.
6 In the Select a Titleblock dialog, select Training A0Horizontal Titleblock.
7 Click OK.
Modify titleblock properties
8 On the Design Bar, click Modify, and select the titleblock.
9 On the Options Bar, click .
10 In the Element Properties dialog, under Other, enter Name for Drawn By, and click OK.
11 Zoom in on the lower-right corner of the sheet.
Adding the Titleblock to a New Project | 559