Metric Tutorials - Autodesk

■ Move the cursor to the right and click between grid lines J and K to place the section tail
and complete the section line.
6 In the Project Browser, under Sheets (all), double-click S-2 Section Views.
7 On the View tab of the Design Bar, click Add View.
8 In the Views dialog box, select Section: Section 1, and click Add View to Sheet.
9 Click on the upper-left corner of the sheet to place the view.
10 With the view selected, right-click, and click Properties.
11 In the Element Properties dialog box, under Graphics, specify 1:100 for View Scale.
12 Drag the title line under the elevation view, and click OK.
13 Adjust the length of the title line by dragging the right end control until it fits under the view.
NOTE If necessary, you can select the view title separately and move it to a new position.
Create a callout view, and add it to the sheet
248 | Chapter 7 Creating Drawings
14 In the Project Browser, under Sections (Building Sections), double click Section 1.