Metric Tutorials - Autodesk

You have created the required worksets for each team member working on this project. The
next step is to create the central file.
20 In the Worksets dialog, click OK
Create the central file
21 Click File menu ➤ Save As.
The central file is created automatically the first time you save the project after enabling worksets.
Navigate to a location on a network drive that all team members have access to, but be sure not
to save the file in the training files location. This is imperative if you and another user intend
to complete the multi-user exercise later in this tutorial. If you do not have access to a network
and still want to complete that exercise, this can be accomplished by saving the central file to
your hard drive and changing your user name before accessing the project.
22 In the Save As dialog, for file name, enter Worksets Project - Central.
23 Click Save.
Check in the worksets
Now that you have created the central file, you must relinquish workset editability so that other
users can have access to the worksets they need.
NOTE Continue using the central file for the following steps.
24 Click File menu ➤ Worksets.
25 In the Worksets dialog, under Show, select:
■ User-Created
■ Families
■ Project Standards
■ Views
26 Select all the worksets by pressing CTRL+A.
27 On the right side of the dialog, click Non Editable.
Enabling Worksharing and Setting Up Worksets | 409