Metric Tutorials - Autodesk

25 On the Design bar, click Modify.
26 On the Drafting tab of the Design Bar, select Detail Component.
27 In the Type Selector, select M_K-Series Bar Joist-Section: 14K3.
28 Place the joist to the left of the beam, and align the top of the joist with the bottom of the deck
as shown.
29 On the Design bar, click Modify.
Add weld symbols
30 In the Project Browser, expand Families ➤ Annotation Symbols ➤ Weld Symbol ➤ select the
bottom, drag it into the view as shown, and click to place it.
31 On the Design Bar, click Modify.
32 Select the weld symbol, and on the Options Bar, click .
33 In the Element Properties dialog, change the following instance parameters:
■ Under Structural, select Field Weld.
■ Enter 0 for Bottom Weld Size.
■ Enter 0 for Bottom Weld Length.
■ Under Other, clear Symbol Left, and select Symbol Right.
■ Click OK.
Creating a Deck Span Transition Detail | 313