Metric Tutorials - Autodesk

NOTE This exercise requires the completion of the previous exercise. Use the project file that you saved at the
end of that exercise, m_RST_Drawings-in progress.rvt.
Create a section view of Level 2, and add it to the sheet
1 In the Project Browser under Structural Plans, double-click Level 2.
2 On the View Toolbar, click , and zoom in on the east area of the structure as shown.
3 On the View tab of the Design Bar, click Section.
4 On the Options Bar, select 1:200 for Scale.
5 Add a section line that cuts through the right side of the building:
■ Click between grid lines G and H to place the start point of the section line and the section
head (section tag).
Creating New Views to Add to Sheets | 247