Metric Tutorials - Autodesk

29 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
30 Proceed to the next exercise, Area Reinforcement in a Slab on page 337.
Area Reinforcement in a Slab
In this exercise, you model area reinforcement in a concrete slab.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_Area_Reinf_Slab.rvt.
Create a section view
1 In the Project Browser, under Structural Plans, double-click Garage Level-1.
NOTE The line weights in your file may differ from the examples shown. Some of the rebar line
weights were increased in the illustrations for training purposes.
2 On the Toolbar, click , and draw a zoom box around the circular foundation on the north
side of the structure as shown.
Area Reinforcement in a Slab | 337