Metric Tutorials - Autodesk

29 To create additional 3D views, click on the View toolbar.
Dynamically Modify Views
Save the view
30 On the View toolbar, click .
The Steering Wheel is displayed in the drawing area. This tool provides freeform navigation for
exterior and interior viewing.
31 Click the arrow on the right side of the Dynamic View icon and select Options.
Using this dialog, you can modify the Steering Wheel visibility and appearance.
32 To save the view, click , supply a view name, and click OK.
The view is listed in the Project Browser under Views ➤ 3D Views.
Create and modify schedules
33 On the View tab of the Design Bar, click Schedule/Quantities.
You may want to add schedules to a template. You may want to consider adding the schedules
that you use most often, and modify their properties accordingly. This can save time and ensure
office standards are maintained.
34 If you want to add schedules to your template, select the category type, and click OK.
35 In the Schedule Properties dialog, make the following modifications as needed:
■ On the Fields tab, select and order required fields.
■ On the Filter tab, assign filters.
■ On the Sorting/Grouping tab, modify settings.
Modifying Views and View Templates | 107