Metric Tutorials - Autodesk

The horizontal projection plane for the slab (brown line) is now aligned with the vertical
projection plane of the wall (green line). Notice the analytical line of the wall moves with the
analytical line of the slab.
35 Click the slab, and on the Option Bar, click .
36 In the Go to View dialog, select Structural Plan: Level 2 - Analytical, and then click Open View.
You are now in sketch mode and the slab perimeter appears in the drawing area.
37 Select the left sketch line of the slab as shown.
38 On the Option Bar, click .
39 In the Element Properties dialog, under Analytical Model, for Analytical Slab Edge, select
Auto-detect, and then click OK.
40 On the Design Bar, click Finish Sketch.
In the Revit dialog, click No.
41 In the Project Browser ➤ Sections (Building Section), double-click Section 3.
42 Click the lower wall, and on the Option Bar, click .
43 In the Element Properties dialog, under Analytical Model, for Horizontal Projection, select
Exterior Face, and then click OK.
492 | Chapter 14 Structural Analytical Modelling