Metric Tutorials - Autodesk

33 In the Filter dialog, click Check None, select Structural Framing (Girder, Joist, and Other),
Structural Beam Systems, and Floors, and then click OK.
34 Click Edit menu ➤ Copy to Clipboard.
35 Click Edit menu ➤ Paste Aligned ➤ Select Levels by Name.
36 In the Select Levels dialog, select Level 6, and Level 7, and click OK.
37 On the View toolbar, click .
Notice the atrium columns on Levels 5 through 7 need to be deleted. This is done for you in
the next training file.
38 Click File menu ➤ Close.
To save changes, click File menu ➤ Save As, and save the exercise file with a unique name, or
close the exercise file without saving changes. The next exercise uses a new training file.
39 Proceed to the next exercise, Adding a Shape-Modified Slab on page 171.
Adding a Shape-Modified Slab
In this new training file, beam systems have been added to the roof level to support a new shape-modified
slab, and the footings added at the beginning of the tutorial have been deleted. In this exercise, you add a
shape-modified slab to the new roof framing, and create a custom roof type with tapered insulation.
In this exercise, you create a shape-modified slab above Level 7.
Training File
■ Click File menu ➤ Open.
■ In the left pane of the Open dialog, click Training Files, and open Metric\m_RST_CSM_5.rvt.
Adding a Shape-Modified Slab | 171