Metric Tutorials - Autodesk

55 Click OK twice.
Add sheet number and project data labels
56 In the Type Selector, select Label: 15mm Label.
57 Place the cursor at the lower-right corner of the Sheet Number field, and click to specify the
label location.
58 In the Select Parameter dialog, select Sheet Number, and click OK.
59 On the Options Bar, click Center and Middle.
60 Place the cursor near the center of the field above the Date field, and click to specify the label
location.
61 In the Select Parameter dialog, select Project Number, and click OK.
62 Select the left drag handle on the label, and drag to the left until the label displays on one line.
63 Place the cursor near the center of the field above the Project Number field, and click to specify
the label location.
64 In the Select Parameter dialog, select Project Name, and click OK.
65 Select the left drag handle on the label, and drag to the left until the label displays on one line.
66 Place the cursor near the center of the field above the Project Name field, and click to specify
the label location.
67 In the Select Parameter dialog, select Client Name, and click OK.
68 Select the left drag handle on the label, and drag to the left until the label displays on one line.
Adding Graphics and Text to a Titleblock | 557