Metric Tutorials - Autodesk

Select a filter
Format units
A new blank cell is created above columns W and D.
5 Click the new heading, and enter SIZE.
6 Right-click the open area next to the schedule, and select View Properties.
7 In the Element Properties dialog, under Other, for Filter, click Edit.
8 In the Schedule Properties dialog, do the following:
■ Click the Filter tab.
■ Select Reference Level for Filter by.
■ Select Ground Level.
■ Click OK.
9 In the Element Properties dialog, click OK.
Notice the schedule is filtered and shows only the structural framing elements of the ground
level.
10 Right-click the open area next to the schedule, and click View Properties.
11 In the Element Properties dialog, under Formatting, click Edit for Value.
12 In the Schedule Properties dialog, click the Formatting tab.
13 Under Fields, click b, and click Field Format.
14 In the Format dialog, do the following:
■ Clear Use project settings.
■ Under Units, select Millimeters.
■ Under Rounding, select 2 decimal places.
Creating a Type Schedule | 269