Metric Tutorials - Autodesk

Create a load schedule
Define the fields
7 On the View tab of the Design Bar, click Schedule/Quantities.
TIP If the View tab of the Design Bar is not active, right-click on the Design Bar, and click View.
8 In the New Schedule dialog, under Category, select Line Loads and click OK.
9 In the Schedule Properties dialog, click the Fields tab.
10 Under Available fields, select Fx 1 and click Add.
The Fx 1 field is moved under Scheduled fields.
11 Using the same process, add the following fields to the schedule:
■ Fx 2
■ Fy 1
■ Fy 2
■ Fz 1
■ Fz 2
■ Nature
12 Under Scheduled fields, order the fields as shown in the following illustration by selecting them
and clicking Move Up or Move Down.
Documenting the Analytical Model | 477